Wall Treatment

Brand: "DAYA"
Waterproof Abrasive Cloth
Sandpaper

: 📌 Description: 

➡️ A coated abrasive designed for wet sanding applications, using a water-resistant paper or cloth backing, and silicon carbide or aluminum oxide abrasives bonded with resin.

: 📌 Features: 

✅ Waterproof.

BC
BONDCRETE BLENDED
WHITE CEMENT
Weight: 25KG

: 📌 Description: 

✅BC Boncrete Blended White Cement is often used in general building works when asthetics appeal is priority. 
✅A choice in formulation of wide range of mortars such as masonry mortar, plastering and rendering.

OBAPROOF
EASY COAT WP SET
(PART A - 4 KG + PART B - 16 KG)

: 📌 Description: 

➡️ Obaproof Oba EasyCoat WP is a cementitious two-part polymer-modified product which is mixed to a slurry consistency and applied to concrete and mortar to provide waterproofing.

OBAPROOF
SKIM COAT
168 FINISH

: 📌 Description: 
✒️ Obaproof Skim Coat 168 Finish is a high-quality cement-based plaster specially developed to patch up undesirable holes or surface unevenness in walls and ceilings giving them a fine and smooth finish.
✒️ It is normally used as a finish coat over Obaproof Skim Coat 165 Base.

OBAPROOF
SKIM COAT
165 BASE

: 📌 Description: 

✅ Obaproof Skim Coat 165 Base is a ready-mixed mortar formulation of cement, limestone powder, graded silica sand and chemical additives.
✅ It is specially developed to give a whiter and brighter surface by patching up pin holes and uneven surfaces in wall and ceiling.

OBAPROOF
PREMIX PLASTER
9921 

: 📌 Description:

✅ Obaproof Premix Plaster 9921 is a specially formulated cement-sand base render containing cement, graded sand and chemicals for a wide range of applications from wall rendering to bricklaying.

ASG
Stopping Compound

📌 Description: 

⇔ Extra smooth fine finished
⇔ Low Shrinkage
⇔ Excellent Workability
⇔ Excellent Crack resistance
⇔ Apply the mixture, filling up the joints using a steel trowel
⇔ Remove excess compound, then apply evenly a thin coat over the joints

MARKSMAN II
Self Adhesive FiberglassTape
Joint Tape Mesh
Dry Wall Tape

: 📌 Description: 
► Fiberglass cloth, combined with resins, is an excellent building material.
► Fiberglass tape is effective for repairs.

501
Professor
Super Glue Tin
20 gm

📍 Description: 
* Super easy, super fast cyanoacrylate adhesive.
* Bonds in seconds on contact.
* No mixing and no clamping needed.
* Dried colorless.
* One drop holds a tonne.

Brand: Naga Dragon
Bitumen Sealant
Sealing Compound

📌 Description: 
* Naga Dragon is a high-performance, weatherproof bituminous sealant designed to repair and protect various surfaces.
* It's ideal for sealing cracks in concrete, bricks, roof tiles, gutters, and more.

📌 Features: 
1.

BRAND: GUITAR TONE
WOOD SHELLAC VARNISH
Exterior & Interior Wood Finish
300 ml

📌 Description: 
* Shellac for wood, colour seals & protects.

USG BORAL / KNAUF SHEETROCK 
ALL PURPOSE JOINT COMPOUND

📍 Description: 
* An air-drying, lightweight compound suitable for all three coat applications or as a finishing coat for all plasterboard joints, angles, and fastener heads.

📍 Preparation:

1. Keep compound at room temperature for 24 hours.

PYE KREK SEAL 
RESIN BASED CRACK SEALER

: 📍 Description:
→ PYE Krek-Seal Is a specially formulated white liquid with a very low viscosity to penetrate , fill and seal the hairline crack in concrete, plaster, brick, block or other similar types of material. 

• Can be used on both horizontal and vertical plaster surfaces.

PYE FLEXI-SEAL
Flexible Waterproof Sealer
Colour: White. Light Grey 

: ► Description: 
✔️ A thick flexible copolymer latex coating that forms a tough continuous membrane with waterproof properties and resistance to weathering.
✔️ It is designed to weatherproof and protect old and new roofs, joints, facades, walls and masonry.

PYE
PUTTYFILLA
Ready Mixed Acrylic Based Filler 

: ⇒ Description:
* PuttyFilla is a ready-mixed quick drying filler for filling small cracks and surface defects, particularly where surface may require painting or redecorating.
* It is also ideal for leveling uneven surface where the tolerance is between 2mm - 5mm in thickness.

X'TRASEAL
WOODFILLA
Type: Natural, Teak 
Size: 0.5kg

: » Description: 
► x’traseal wood filler is a celluulose fibre ready mixed high performance water based filler that give a tough and smooth sandable surface after dried, it can be stained, varnished, painted and act like real wood.

X'TRASEAL
PUTTY FILLER

📍 Description: 
✅ Putty Filler is a ready-to-use filler for exterior and interior use.
✅ For filling cracks and leveling of uneven surfaces.
✅ Ready-mixed formulation, time saving with minimal wastage, economical and convenient to use.